Reinventing Wheels Mini Wood/Coal Burning Stove
In Stock Add to Cart
These are mini wood burners they are very small they do get very hot , could also be used as a fire box for a smoker to smoke meat or fish. The body is made from 100 x 100 mm box section The Handel on the door is made from steel with a brass shell casing pushed over the top for decoration this can be removed if you wish. They are fitted with a short flue which is 48 mm external so a peace of 50 mm x 1 mm wall tube will be a tight fit over it or 51 mm x 1.5 mm other 50mm pipe joiners can also be used They are made from thick steel which is welded so they are very strong and durable, minimum thickness is 3mm unlike others that are only 1mm This is my top loading design so it can take a a lot of fuel for its size and is loaded from the top a welding glove oven glove or pliers are can be used to lift the lid as it will be very hot once the fire is lit or as you can see from the photos 2 peaces of wood can also be used The small door at the bottom of the unit is to light clean and regulate the air to the fire. I used a inferred thermometer to test the temperature of this unit as you can see from the photos it go up to 321 degrees C then maxed out on the outer body of the unit. this was after only 10 minis of lighting with peaces of split pallet wood. this unit does draw very well when dry wood is used with a hard wood it would be higher temperature and with coal even higher I would estimate 500+ You can use a variety of fuels for example: wood (dry) wood chips (dry) bbq charcoal brickets peat coal * *If you wish to use coal I would recommend fitting a small grill in the bottom to keep coal from directly touching the bottom as it will extend the life of the unit.
Miniture Wood Burner, 320mm From Floor To Top Plate Top Plate Measures 150mmx150mm, Suitable For A Small Pan (At Least 3mm Thick) Short 48mm Flue Included As Shown In Images Small Door To Regulate Air Flow And Heat Output Suitable To Burn Wood /Wood Chips (Dry) BBQ coal, Brickets, Peat & Coal